臥式多級單吸離心泵的工作條件
多級泵是我公司依據市場需求而開發的系列產品，本產品與同類產品相比其同型號各規格之間的揚程差較小，可便當用戶選用.本產品契合GB/T 5657-1995 <<離心泵技術條件(Ⅲ)>>規范。
工作條件：
轉速：1480/2950r/min
液體：清潔水或理化性能相似于水的液體。
液體溫度：≤120℃
流量范圍：3.7～200m3/h
揚程范圍：12.1～240m
最高工作壓力：吸入口壓力+泵最大壓力≤2.5Mpa
● 全方位降低噪聲
● 共同的水力部件設計、良好的過流性能、加厚的中段，最大限度的減少了活動噪聲
● 配用高質量電機，大大降低機組的風扇噪聲
●根絕咬死
The multi-stage pump is a series of products developed by our company according to the market demand. Compared with similar products, this product has smaller head difference between different specifications of the same model, so it is convenient for users to choose. This product conforms to Gb/t 5657-1995 & Lt; Centrifugal Pump Specifications (III) & GT; & GT; Specification. WORKING CONDITIONS: rotate speed: 1480/2950r/min liquid: clean water or liquid with physical and chemical properties similar to water. Liquid temperature: ≤120 °C flow range: 3.7 ~ 200 M3/H head range: 12.1 ~ 240 m maximum working pressure: Suction pressure + pump maximum pressure ≤2.5 MPA ● omnidirectional noise reduction ● common hydraulic component design, good flow performance, thickened middle section, minimize the active noise ● with high-quality motor, greatly reduce the noise of the unit's Fan ● bite to death
